Felted tribal duffle
Knitting

MEASUREMENTS

Approx 24 ins [64 cm] around x 11 ins [29 cm] high.

MATERIALS

Name  

Weight

4'' Needles Meter Gram
S R
Patons North America

Classic Wool Worsted
100% wool Worsted
20 26 4.5 mm
7 US
192 100

Main Color (MC) (207 Rich Red) 1 ball

Contrast A (226 Black) 3 balls

Contrast B (204 Old Gold) 1 ball

Contrast C (206 Russet) 1 ball

Size 4.5 mm (U.S. 7) knitting needles or size needed to obtain tension.

size 4.5 mm (U.S. 7) circular knitting needle 16 ins [40 cm] long or size needed to obtain tension.

TENSION

20 sts and 26 rows = 4 ins [10 cm] in stocking st.

STITCH GLOSSARY

Bobble =

[(K1. yfwd) 3 times. K1] in next st. 7 sts.

Slip 6th, 5th, 4th, 3rd, 2nd and 1st sts separately over 7th st. 1 st remains.

Bobble complete

INSTRUCTIONS

Note:

When working from charts, carry yarn loosely across WS of work but never over more than 3 sts.

When it must pass over more than 3 sts, weave it over and under color in use on next st or at center point of sts it passes over.

Main Section

With MC and circular needle, cast on 156 sts.

Join in rnd, placing a marker on first st.

Knit rows 1 to 12 of Chart I, reading rows from right to left and noting 3 st rep will be worked 52 times.

Rep rows 5 to 12 of Chart I once, dec 2 sts evenly across last rnd. 154 sts.

Knit rows 1 to 11 of Chart II, reading rows from right to left, noting 22 st rep will be worked 7 times and inc 2 sts evenly across last row. 156 sts.

Knit rows 1 to 12 of Chart I, noting 3 st rep will be worked 52 times.

Rep rows 5 to 12 of Chart I once.

With MC, knit 3 rnds.

Knit rows 1 to 10 of Chart III, reading rows from right to left and noting 6 st rep will be worked 26 times

Knit rows 1 to 12 of Chart I, noting 3 st rep will be worked 52 times.

Ribbing:

1st rnd: *With B, K2. With A, K2. Rep from * around.

2nd rnd: *With B, P2. With A, K2. Rep from * around.

3rd rnd: *With A, P2. With C, K2. Rep from * around.

4th rnd: As 3rd rnd.

5th rnd: *With MC, P2. With A, K2. Rep from * around.

6th rnd: As 5th rnd.

7th and 8th rnds: As 3rd rnd.

9th and 10th rnds: As 2nd rnd.

Rnds 3 to 10 form ribbing pat.

Work a further 16 rnds in ribbing pat.

With A, knit 1 rnd. Cast off.

Base

With A and pair of needles, cast on 48 sts.

Proceed in stocking st until work from beg measures 15 ins [38 cm], ending with a purl row.

Cast off.

Straps (make 2)

With A and pair of needles, cast on 9 sts.

1st row: (RS). *K1. P1. Rep from * to last st. K1.

Rep last row for seed st pat until Strap measures 27 ins [68.5 cm].

Cast off in pat.

FINISHING

Felt all pieces.

Felted pieces for Main Section should measure approx 24 ins [64 cm] around and 11 ins [29 cm] high.

Felted piece for Base should measure approx 8 ins [20.5 cm] wide and 11 ins [28 cm] high.

Cut Base to an oval shape 9 ins [23 cm] wide by 7 ins [19 cm] high.

Pin to bottom of Main Section.

With 2 strands of A, blanket st Base to Main Section.

Make small holes around top edge of Bag for drawstring 1 ins [3 cm] down from top edge, spaced approx 1 inch [2.5 cm] apart.

Trim Straps to measure 24 ins [61 cm] long.

Mark center st at top and base of Bag (center back).

Sew ends of Straps on either side of marked st at top of Bag, under row of drawstring holes.

Sew other ends of Straps 4 ins [10 cm] either side of marked st at base.

Drawstring:

With 2 strands of MC, make a twisted cord 38 ins [96.5 cm] long.

Weave through drawstring holes of Bag having cords meet at center front.

Twisted Cord:

Cut 2 lengths of MC 95 ins [235 cm] long.

With all strands tog hold one end and with someone holding other end, twist strands to the right until they begin to curl.

Fold the 2 ends tog and tie in a knot so they will not unravel.

The strands will now twist themselves tog.

Adjust length if desired.

 

 

HOW TO FELT INSTRUCTIONS

Important to know before felting:

It is important to record all the measurements and changes before and after felting. You will be able to either adjust or repeat the method to produce reliable and consistent results.

Always test a sample. Different colored yarns may felt differently. Some colors have to undergo the felting more than once in order to achieve the desired result.

As yarn will be going into very hot water, color-fastness can be affected. Again, testing a sample will give you an indication of how the color will be affected in very hot water.

Any knitting that has been properly felted will have a distinct texture. The knitted or crocheted piece becomes very dense and matted. This will be one of the key criteria for determining that felting has occurred.

FELTING

Put pieces in top-loading washing machine. Put in a pair of jeans or large towel (in non-interfering color) for extra agitation. Using low water level, run a Hot/Cold cycle for 15 min.

Add 2 tablespoons of baking soda for a small load. After one cycle, check for size. Repeat as necessary.

Run through the rinse and dry spin cycle.

Lay felted piece on a dry towel, away from direct heat or sunlight.

Shape piece to correct measurements.

Allow to dry thoroughly. Do not use a clothes dryer.

If an edge ripples, baste a thread through the edge and gather in. Remove the thread after felted item is dry.

When piece is dry, use tailor's chalk to mark cutting (trimming) lines.

AFTERCARE

You have spent a lot of time and care completing these items through their knitting/crocheting and felting stages. A little thought to aftercare will ensure that you will have these beautiful felted items for many years to come.

After you have subjected your item to the felting process, you may think that it has gone through the most vigorous and tortured wash that yarn could ever endure. Now you assume that you can throw that felted item into the hot wash cycle along with your sheets. Do not do it! Treat your newly felted item with caution and care in order to avoid further shrinkage or distortion.

Felted handmade items can always be improved with brushing.

Even a slight pressing will give a smoother appearance to felted fabric. Always press lightly using a steam iron and a damp cloth. Never press down on the fabric but hold the iron just above the fabric.

BASED ON OUR CALCULATIONS

Knit Swatch

After felting, the sample is approx 85% of the width and 75% of the length of the knitted sample before felting.

   

Crochet Swatch

After felting, the sample is approx 80% of the width and 95% of the length of the crocheted sample before felting.

   

 

 

 

 

 

 

 

Recherche personnalisée