Hat, Mittens and Cowl
Knitting

   

   

ABBREVIATIONS:

Alt = Alternate(ing) Beg = Beginning Cont = Continue(ity) Inc = Increase(ing)
K = Knit K1tbl = Knit next stitch through back of loop K2tog = Knit next 2 stitches together
Kfb = Increase 1 stitch by knitting into front and back of next stitch P1tbl = Purl next stitch through back of loop
Pat = Pattern P2(3)tog = Purl next 2(3) stitches together Psso = Pass slipped stitch over WS = Wrong side
Rem = Remain(ing) Rep = Repeat Rnd(s) = Round(s) P = Purl
Sl1 = Slip next stitch knitwise St(s) = Stitch(es) Tog = Together Yo = Yarn over
Ssk = Slip next 2 stitches knitwise one at a time. Pass them back onto left-hand needle, then knit through back loops together
C6B = Slip next 3 stitches onto cable needle and leave at back of work. K3, then K3 from cable needle
C6F = Slip next 3 stitches onto cable needle and leave at front of work. K3, then K3 from cable needle
Cr4F = Slip next stitch onto cable needle and leave at front of work. K3, then K1 from cable needle
Cr4B = Slip next 3 stitches onto cable needle and leave at back of work. K1, then K3 from cable needle

MATERIALS

Name

  

Weight

 Gauge
4''		 Aig.
 Meters Gramm
S R
Bernat

Softee Chunky Solids		 100% Acrylique Super Bulky
 11 14 8 mm
U.S. 		99 100
Bernat

Softee Chunky Ombres		 100% Acrylique Super Bulky
 11 14 8
U.S. 		70 80

Bernat Softee Chunky Solids:

Grass (28223), Ultra Blue (28742) or Natural (28008)

Entire Set 6 balls

Mittens 1 ball

Cowl 5 balls

Hat 2 balls

Bernat Softee Chunky Ombres:

Kimono Ombre (29125)

Entire Set 6 balls

Mittens 2 balls

Cowl 6 balls

Hat 2 balls

Sizes U.S. 9 (5.5 mm), U.S. 10½ (6.5 mm) and U.S. 11 (8 mm) knitting needles or size needed to obtain gauge.

Cable needle.

MEASUREMENTS

Hat and Mittens: One size to fit average woman.

Cowl: Approx 15” [38 cm] wide x 59” [150 cm] around.

GAUGE

Mittens: 13 sts and 16 rows = 4” [10 cm] in stocking stitch with U.S. 10½ (6.5 mm) knitting needles.

Hat and Cowl: 11 sts and 14 rows = 4” [10 cm] with U.S. 11 (8 mm) knitting needles.

INSTRUCTIONS

MITTENS

RIGHT MITTEN

**With U.S. 9 (5.5 mm) needles, cast on 23 sts.

1st row: (RS). *K1. P1. Rep from * to last st. K1.

2nd row: *P1. K1. Rep from * to last st. P1.

Rep last 2 rows (K1. P1) ribbing for 2½” [6 cm], inc 2 sts evenly across last WS row. 25 sts.

Change to U.S. 10½ (6.5 mm) needles.

** 1st row: (RS). K2. P10. K13.

2nd row: P13. K1. *P3tog. (K1. P1. K1) all in next st. Rep from * once more. K1. P2.

3rd row: As 1st row.

4th row: P13. K1. *(K1. P1. K1) all in next st. P3tog. Rep from * once more. K1. P2. Last 4 rows form pat.

Work a further 4 rows in pat.

Shape thumb gusset:

1st row: (RS). Pat across 13 sts. (Kfb) twice. Knit to end of row.

2nd and following alt rows: Work even in pat.

3rd row: Pat across 13 sts. Kfb. K2. Kfb. Knit to end of row.

5th row: Pat across 13 sts. Kfb. K4. Kfb. Knit to end of row. 31 sts.

6th row: As 2nd row.

Shape thumb:

Next row: (RS). Pat across 21 sts. Turn. Leave rem sts on a spare needle.

***Next row: Cast on 1 st. P9 (including cast on st). Turn. Leave rem sts on a spare needle.

Next row: Cast on 1 st. K10 (including cast on st).

Work a further 5 rows in stocking st on these 10 sts.

Next row: (RS). (K2tog) 5 times. 5 sts.

Next row: (P2tog) twice. P1. 3 sts.

Break yarn, leaving a long end.

Draw end tightly through rem sts.

Sew thumb seam.

Next row: (RS). Rejoin yarn.

Pick up and knit 2 sts over cast on sts at base of thumb.

Pat to end of row across sts from spare needle. 25 sts.***

Cont in pat until work from beg measures approx 9½” [24 cm], ending with the following pat row:

Last row: (WS). P13. K1. *P3tog. (K1. P1. K1) all in next st. Rep from * once more. K1. P2.

Shape top:

1st row: (RS). K2. P10. ssk. K2tog. K6. ssk. K1. 22 sts.

2nd row: P10. K2. (P3tog. K1) twice. P2. 18 sts.

3rd row: K2tog. (P2tog) 3 times. (K2tog) 5 times. 9 sts.

Break yarn leaving a long end.

Draw end tightly through rem sts.

Sew side seam.

LEFT MITTEN

Work from ** to ** as given for Right Mitten.

1st row: (RS). K13. P10. K2.

2nd row: P2. K1. *P3tog. (K1. P1. K1) all in next st. Rep from * once more. K1. P13.

3rd row: As 1st row. 4th row: P2. K1. *(K1. P1. K1) all in next st. P3tog. Rep from * once more. K1. P13.

Last 4 rows form pat.

Work a further 4 rows in pat.

Shape thumb gusset:

1st row: (RS). Pat across 10 sts. (Kfb) twice. Pat to end of row.

2nd and alt rows: Work even in pat.

3rd row: Pat across 10 sts. Kfb. K2.Kfb. Knit to end of row.

5th row: Pat across 10 sts. Kfb. K4. Kfb. Knit to end of row. 31 sts.

6th row: As 2nd row.

Shape thumb:

Next row: (RS). Pat across 18 sts.

Turn.

Leave rem sts on a spare needle.

Work from *** to *** as given for Right Mitten.

Cont in pat until work from beg measures approx 9½” [24 cm], ending with the following pat row:

Last row: (WS). P2. K1. *P3tog. (K1. P1. K1) all in next st. Rep from * once more. K1. P13.

Shape top:

1st row: (RS). K1. K2tog. K6. K2tog. ssk. P10. K2. 22 sts.

2nd row: P2. K2. (P3tog. K1) twice. P10. 18 sts.

3rd row: (K2tog) 5 times. (P2tog) 3 times. K2tog. 9 sts.

Break yarn, leaving a long end.

Draw end tightly through rem sts.

Sew side seam.

COWL

Cable Panel (worked over 21 sts). (See Chart I).

1st row: (RS). K6. P2. K2tog. yo. P1. yo. ssk. P2. K6.

2nd row: P6. K2. P2. K1. P2. K2. P6.

3rd row: C6F. P2. yo. ssk. P1. K2tog. yo. P2. C6B.

4th row: As 2nd row.

5th and 6th rows: As 1st and 2nd rows.

7th row: K6. P2. yo. ssk. P1. K2tog. yo. P2. K6.

8th row: As 2nd row.

9th row: C6F. P2. K2tog. yo. P1. yo. ssk. P2. C6B.

10th row: As 2nd row.

11th row: As 7th row.

12th row: (P2. K2) twice. P2. K1. (P2. K2) twice. P2.

13th row: yo. ssk. P2. K6. P1. K6. P2. K2tog. yo.

14th row: P2. K2. P6. K1. P6. K2. P2.

15th row: K2tog. yo. P2. C6B. P1. C6F. P2. yo. ssk.

16th row: As 14th row.

17th and 18th rows: As 13th and 14th rows.

19th row: K2tog. yo. P2. K6. P1. K6. P2. yo. ssk.

20th row: As 14th row. 21st row: yo. ssk. P2. C6B. P1. C6F. P2. K2tog. yo.

22nd row: As 14th row.

23rd row: As 19th row.

24th row: As 12th row.

These 24 rows form Cable Panel pat.

With U.S. 11 (8 mm) needles, cast on 45 sts.

1st row: (RS). K2. P10. Work 1st row of Cable Panel across next 21 sts. P10. K2.

2nd row: K2. *P3tog. (K1. P1. K1) all in next st. Rep from * once more. K2. Work 2nd row of Cable Panel across next 21 sts. K2. **(K1. P1. K1) all in next st. P3tog. Rep from ** once more. K2.

3rd row: K2. P10. Work 3rd row of Cable Panel across next 21 sts. P10. K2. 4th row: K2. *(K1. P1. K1) all in next st. P3tog. Rep from * once more. K2. Work

4th row of Cable Panel across next 21 sts. K2. **P3tog. (K1. P1. K1) all in next st. Rep from ** once more. K2.

These 4 rows form Trinity St pat.

Cable Panel is now in position.

Cont in pat, keeping cont of Cable Panel, until work from beg measures approx 59” [150 cm] ending on a 10th row of Cable Panel pat.

Cast off in pat. Sew cast on and cast off edges tog.

HAT CABLE PANEL

(worked over 11 sts). (See Chart II).

1st row: (RS). P1. Cr4F. K1. Cr4B. P1.

2nd row: K1. P9. K1.

3rd row: P1. K9. P1.

4th row: As 2nd row.

These 4 rows form Cable Panel B.

With U.S. 9 (5.5 mm) needles, cast on 53 sts.

1st row: (RS). *P1. K1tbl. Rep from * to last st. P1.

2nd row: *K1. P1tbl. Rep from * to last st. K1.

Rep last 2 rows

Twisted Ribbing Pat for 1½” [4 cm], ending on a 2nd row.

Next row: (Fold line). Purl. Beg on a 1st row (RS is now reversed for cuff turnback), work in Twisted Ribbing Pat for 1½” [4 cm], from fold line, ending on a 2nd row and inc 8 sts evenly across last row. 61 sts.

Change to larger needles and proceed in pat as follows: (See Chart II).

1st row: (RS). (P1. K1) twice. *P1. Work 1st row Cable Panel. P1. (K1. P1) 3 times. K1. Rep from * once more. P1. Work 1st row Cable Panel. P1. (K1. P1) twice.

2nd row: (K1. P1) twice. *K1. Work 2nd row Cable Panel. K1. (P1. K1) 3 times. P1. Rep from * once more. K1. Work 2nd row Cable Panel. K1. (P1. K1) twice. 3rd row: (K1. P1) twice. *K1. Work 3rd row Cable Panel. K1. (P1. K1) 3 times. P1. Rep from * once more. K1. Work

3rd row Cable Panel. K1. (P1. K1) twice.

4th row: (P1. K1) twice. *P1. Work 4th row Cable Panel. P1. (K1. P1) 3 times. K1. Rep from * once more. P1. Work 4th row Cable Panel. P1. (K1. P1) twice.

These 4 rows form Irish Moss St Pat.

Cable Panel is now in position.

Cont in pat until work from beg measures approx 8½” [21.5 cm], ending on a 4th row of Cable Panel pat.

Shape top:

1st row: (RS). Pat across 4 sts. *P2tog. Cr4F. K1. Cr4B. P2tog. Pat across 7 sts. Rep from * once more. P2tog. Cr4F. K1. Cr4B. P2tog. Pat across last 4 sts. 55 sts.

2nd and 4th rows: Knit all knit sts and purl all purl sts as they appear.

3rd row: Pat across 4 sts. *P1. (K2tog) twice. K1. (K2tog) twice. P1. Pat across 7 sts. Rep from * once more. P1. (K2tog) twice. K1. (K2tog) twice. P1. Pat across last 4 sts. 43 sts.

5th row: (K2tog) twice. *P1. K1. Sl1. K2tog. psso. K1. P1. (K2tog) 3 times. K1. Rep from * once more. P1. K1. Sl1. K2tog. psso. K1. P1. (K2tog) twice. 27 sts.

6th row: (P2tog) 13 times. P1. 14 sts.

Break yarn leaving a long end.

Draw end tightly through rem sts and fasten securely.

Sew center back seam.

Pompom:

Wind 2 strands of yarn around 4 fingers approx 60 times.

Remove from fingers and tie tightly in center.

Cut through each side of loops.

Trim to a smooth round shape (approx 4” [10 cm] diameter).

Sew to top of Hat.

   

 

 

 

 

 

 

 

Recherche personnalisée